commercial Sand Filter for swimming pool filtration made of
New spiral cover system which aids the operations of opening and
closing. The air purge is built into the cover which can be
efficient to release the air from the filter. The distance between
the upper part of the sand layer and the diffuser head
(''freeboard'') has been increased to ensure greater distribution
of water in the filtration phase and avoid sand being spilt into
the drain during backwash.
The specially designed hole in the sand filter can make the sand
exchanging process more convenient and efficient. In the filtering
process, the filtering effect of water can be observed through the
perspective hole which is designed in the sand filter.
Commercial sand filter is used in larger size installations, such
as commercial and communal swimming pool, aquatic park, aquariums
and water treatment. On demand, filters with special heights can be
manufactured. Filters with diameters greater than 2500 mm and 3000
mm will be transported in special vehicles.
|Model||Diameter (mm)||Height (mm)||Outlet (mm)||Filer area (m2)||Flow (m3/h)||Sand* (kg)||Gravel (1-2 mm)||weight in operation (kg)|
* Use only #20 white silica sand, size range0.4-0.8mm.
*Maximum working pressure: 2.5kg/cm² (35 psi ); maximum temperature: 50°C(122°F)
* filtration bed height 1m (3ft)
* on demand,filter with special heights can be manufactured.
* filters with diameters greater than Φ2500mm and Φ3000mm will be transported in special vehicles
* optional parts: side manhole, sightglass, air relief valve